Complex fluid and blood warming system «AMPIRmini» with two external heat exchanger

  • Garanty 2 years
- Maintaining set temperature during 24 h
- Sound and light warning, self-testing
- Low flow rate

Warmer «AMPIRmini» is used for continuous warming of fluid, infusion solutions, blood and its substitutes, nutrient solutions. Using in the surgical wards and intensive care units for prevention and treatment of hypothermia and pre-, intra- and postoperative negative aftereffects.

Sheme

Blood and fluid warming system consists of:

1) Control unit

  • LED display of current warming temperature
  • Separate control buttons
  • Various operating modes: in Manual mode the temperature is controlled in the range from 34°С to 42°С. In Auto mode the heat exchanger output temperature is maintained at 36.6°С
  • Sound and light warning, self-testing upon switching on and during operation

2) Two external heat exchanger

  • One or two infusion systems can be placed in one heat exchanger at the same time
  • It is placed in close proximity to the injection site, providing a minimum distance from the output of the heat exchanger to the patient
  • Maximum flow rate up to 520 ml/h (two infusion lines in the heat exchanger) or 900 ml/h (one infusion line in the heat exchanger)
  • Infusion lines of various diameters

3) Mounting

  • Fluid and blood warming system can be mounted on a stand with the diameter of 15-55 mm
  • Secure non-slip mounting on a stand 
Specifications
  • Power supply
    230 ±23 V / 50 Hz
  • Average power consumption
    40 W/h
  • Temperature setting
    34°С to 42°С
  • Temperature accuracy
    0.1°С
  • Warming-up time to 37 ºC
    2 min
  • Continuous work time
    24 h
  • Type/class of protection against electric shock
    ВF/I
  • Ingress protection rating
    IP 23
  • Weight of AMPIRmini with two external heat exchanger
    approx. 2.1 kg
  • CE-marked
Get a quotation or advice on equipment
Similar products
Site menu