Complex blood and infusion warming system «AMPIRmini» with one external heat exchanger
- Maintaining set temperature during 24 h
- Sound and light warning, self-testing
- Low flow rate
- Sound and light warning, self-testing
- Low flow rate
Warming system «AMPIRmini» is used during infusion and transfusion of blood, intravenous therapy for children and adults, the injection of nutrient solutions through a nasal or enteral probes. Using in the surgical wards and intensive care units for prevention and treatment of hypothermia and pre-, intra- and postoperative negative aftereffects.
Blood and infusion warming system consists of:
1) Control unit
- LED display of current warming temperature
- Separate control buttons
- Various operating modes: in Manual mode the temperature is controlled in the range from 34°С to 42°С. In Auto mode the heat exchanger output temperature is maintained at 36.6°С
- Sound and light warning, self-testing upon switching on and during operation
2) External heat exchanger
- One or two infusion systems can be placed in one heat exchanger at the same time
- It is placed in close proximity to the injection site, providing a minimum distance from the output of the heat exchanger to the patient
- Maximum flow rate up to 520 ml/h (two infusion lines in the heat exchanger) or 900 ml/h (one line in the heat exchanger)
- Infusion lines of various diameters
3) Mounting
- Infusion and blood warming unit can be mounted on a stand with the diameter of 15-55 mm
- Secure non-slip mounting on a stand
Specifications
-
Power supply230 ±23 V / 50 Hz
-
Average power consumption40 W/h
-
Temperature setting34°С to 42°С
-
Temperature accuracy0.1°С
-
Warming-up time to 37 ºC2 min
-
Continuous work time24 h
-
Type/class of protection against electric shockВF/I
-
Ingress protection ratingIP 23
-
CE-marked+