Complex blood and infusion warming system «AMPIRmini» with one external heat exchanger

- Maintaining set temperature during 24 h
- Sound and light warning, self-testing
- Low flow rate

Warming system «AMPIRmini» is used during infusion and transfusion of blood, intravenous therapy for children and adults, the injection of nutrient solutions through a nasal or enteral probes. Using in the surgical wards and intensive care units for prevention and treatment of hypothermia and pre-, intra- and postoperative negative aftereffects. 

Blood and infusion warming system consists of:

1) Control unit

  • LED display indicates current temperature
  • Separate control buttons
  • 2 operating modes:
    - Manual mode: the temperature can be set between 34°С and 42°С with 0.1°С increments;
    - Auto mode: temperature is maintained at 36.6°С
  • Audible and visual alarms, self-diagnostics at the power-up and during operation

2) External heat exchanger

  • Designed for one or two IV lines (adults or adults + infants)
  • The heat exchanger can be mounted very close to the injection site, providing minimum distance from the heat exchanger to the patient.
  • Max. flow rate 900 ml/h (with 1 IV line)
  • Open system. Standard infusion lines required
  • Duralumin heating plate: high thermal conductivity, durability and resistance to mechanical stress

3) Mounting

  • Infusion and blood warming unit can be mounted on a stand  with the diameter of 15-55 mm
  • Secure non-slip mounting on a stand 

Specifications
  • Power supply
    110-230 VAC, 50/60 Hz
  • Average power consumption
    40 W/h
  • Temperature setting
    34°С to 42°С
  • Temperature increment
    0.1°С
  • Warming-up to 37 ºC
    2 min
  • Continuous operation
    24 h
  • Electric shock protection class
    ВF/I
  • Protection rating
    IP 23
  • CE-marked
    +
Get a quotation or advice on equipment
Similar products
Site menu