Fluid and blood warming system «AMPIRmini» with two external heat exchangers
-
Warranty 2 years
- Open system. Any standard IV lines can be used
- 24h set temperature maintenance
- Audible and visual alarms, self-diagnostics
- 24h set temperature maintenance
- Audible and visual alarms, self-diagnostics
AMPIRmini warmer is used for continuous warming of fluids, infusion solutions, blood and its substitutes, nutrient solutions. The complex is used in surgical wards and intensive care units for the prevention and treatment of hypothermia in perioperative periods and its negative aftereffects.
Blood and fluid warming system consists of:
1) Control unit
- LED display indicates current temperature
- Separate control buttons
- 2 operating modes:
- Manual mode: the temperature can be set between 34°С and 42°С with 0.1°С increments;
- Auto mode: temperature is maintained at 36.6°С - Audible and visual alarms, self-diagnostics at the power-up and during operation
2) Two external heat exchangers
- Use of standard IV lines, incl. pediatric (option)
- The heat exchanger can be mounted very close to the injection site, providing minimum distance from the heat exchanger to the patient.
- Max. flow rate 2 000 ml/h
- Duralumin heating plate: high thermal conductivity, durability and resistance to mechanical stress
3) Mounting
- Can be mounted on an IV stand or rail with the diameter of 15-55 mm
- Secure non-slip mounting on a stand
Specifications
-
Power supply110-230 VAC, 50/60 Hz
-
Average power consumption40 W/h
-
Temperature setting34°С to 42°С
-
Temperature increment0.1°С
-
Warming-up to 37 ºC2 min
-
Continuous operation24 h
-
Electric shock protection classВF/I
-
Protection ratingIP 23
-
Weight of AMPIRmini with two external heat exchangerapprox. 2.1 kg
-
CE mark+